The 55 footer is the result of the cooperation between Studio Zuccon International Project and Ferretti Group’s Engineering Department. The profile of the boat features sober, streamlined, slender lines, blending together refined elegance and a sporty character. The uninterrupted glazing running across the main deck further enhances the boat’s rakish profile, and is complemented by a large, aerodynamic flybridge. Three large glazed surfaces - the cabins’ windows - can be found on both sides of the hull.
For her interior spaces and on-board equipment this yacht enjoys an equal standing with much larger yachts. Many outdoor relaxation areas have been conceived: the forward dinette area, furnished with facing sofas and a table; the large sunpad on the deckhouse; and the cockpit, featuring a large aft sofa and a table. On the flybridge, the storage cabinet and the restyled, small-size pilot station instrument panel allow to extend the relaxation areas - both the sunpad and the comfortable dining area - even more.
The Group’s architects and designers have found very appealing décor solutions, adding elegance to all on-bord ambiances and preserving the range’s unique Made-in-Italy style and charm. The areas below deck come in as many as three alternative layouts. The two ‘traditional’ ones include three cabins -the master stateroom, the VIP and the guest cabins - with two or three heads. This wide range of solutions can attract different types of owners, who may choose from among the different layouts depending on the way they intend to use their yacht.
The new Ferretti Yachts 550 will install two shaft drive Cummins QSM11 715 mhp, 2,500 rev/minute engines. While highly-performing, these small-sized and lower power engines will push the yacht to a maximum speed of 30 knots and a cruising speed of 26.5 knots. The range will be 250 and 300 nautical miles, respectively. A bow thruster will be installed standard on the Ferretti Yachts 550, while a gyroscope stabilizing system can be installed upon request to ensure even more comfort at anchor and facilitate berthing manoeuvres.
Photo: Ferretti Yachts
| Technical details | |
| Producer: | FERRETTI (IT) |
| LOA: | 55'05 ft |
| LOA: | 16,90 m |
| Hull lenght: | 16,43 m |
| Waterline lenght: | 14,17 m |
| Beam: | 4,86 m |
| Draught: | 1,38 m |
| Displacement: | 27.400 kg |
| Fuel tank: | 2.500 l |
| Water tank: | 680 l |
| Max. passengers: | 14 |
| Berths: | 6 |
| Cabins: | 3 |
| Engine: | 2x715 HP |
| Top speed: | 30 kn |
| Cruising speed: | 26,5 kn |
| Range: | 300 nm |
Related articles
Jeanneau Prestige 420 i 420S
The Prestige 420&420s features an incredible layout for a yachts of this size
