Cleats

14.02.2007 nauCAT
  •  Share on X
Cleats
Technical details
Producer: Accon Marine (USA)

Pull-Up Wide-Line Series
Cleat pulls up simply push it back down when its no longer needed and it locks in the flush position. In the up position, Pull-UP Cleats function exactly like a conventional cleat. sizes: 4-inch, . Made of marine grade stainless steel. Each PULL-UP Cleat is shipped with an aluminum backing plate which also serves as the cut-out template. Screws are not included.
Features
Sleek, low profile appearance
Large flange helps cover rough cut-out area
Made of 316 cast stainless steel
Mounts from the bottom via welded stainless steel threaded studs
Stud lengths are 1 5/8" on the 305-4, 1 7/8" on the 305-6, 2 5/8" on the 305-8 and 3" on the 305-10
Installation - Drill four holes and saw-cut clearance between the two center holes. Backing hardware is standard on all models and is included with each cleat. (www.acconmarine.com)

  •  Share on X

Most read